Amp module PAM8610 - CLASS D - 2x15W

PAM8610 based very small  Class-D 2x15W amp module.

• PAM8610 based Class-D power amp module
• Output power (12V power supply) 2x15W @ 10% THD (4ohm), 2x8W 1% THD (8ohm), 2x5W 0,1% THD (8ohm)
• Power supply voltage: 7-15V
• Recommended power supply voltage: 12V
• Quiescent current: 20mA
• Speaker impedance: 4-8ohm
• SW pads can be used as power switch (short circuit = power on)
• size: circa 30x25mm
• Power supply in, line in, speaker out connectors: solder pads
• Design inspected and measured with audio analyzers and listening tests in our lab

Suitable power supply:
12V / 2A, 24W switched mode power supply - 2.1mm (center positive)

Please note: Class-D amp modules can easily be destroyed if the supply voltage is too high, supply voltage polarity is not correct, or speaker impedance is not right.

Please note 2: There are lots of different low-cost Class D boards available. Some are great, some decent, and many are not that good. Some do not even work at all. We have tried many different boards and preselected ones that have a good price to quality ratio. We have measured and listened to every design in our audio lab. We try to be as honest as possible and tell the truth about quality. We also publish modifications if we found a way to improve sound quality.