DDS Function generator (sine, square, triangle, saw... 1Hz - 20K -200K)

Function generator for measurements and testing. Affordable and compact.

Specifications provided by the manufacturer (we do not guarantee distortion percentages or frequency ranges)

1. Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat up to 200 kHz, and the output amplitude decreases as the frequency further increases), other waveforms 1Hz-20kHz (but the upper limit of the adjustable frequency is not limited. If there is no high demand for distortion and vibration, the frequency can be further increased)
2. Resolution: 1Hz
3. Output waveforms: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave
4. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz
5. Output Amplitude: ±10 V (P-P)
6. Output Impedance: 50 ohms
7. DC Offset: ±10V, related to shutdown function
8. Features filters which can be turned on and off, suitable for sine wave and pulse waveform outputs
9. Power Supply: DC3.5-10V. Recommended to use a DC5V adapter.