UralTone Eurorack Series - Dual Channel Mic Pre -kit

UralTone Dual Channel Mic Pre is expansion designed for the Micro Mixer. With this module, Micro Mixer is improved with two mic level inputs. Preamp is connected to Micro Mixer with the bus-connector which supplies the power and carries the audio signal to main and aux outputs. Itäs possible to use the module as is by adding separate connector to output. The insert outputs are usable for extracting signal directly from mic preamp section aswell.

Module uses THAT1510 ic-circuit, which performs really well and won't require too many additional parts to operate. Mid Pre has phantom power feed for both channels and gain, pan, aux and volume potentiometers. 

Module is designed to be builded easily. All parts are traditional through hole type and the layout is clear and easy to follow for beginners.

Dials: Gain, Volume, Pan, Aux
Swiches: Phantom, aux source
Connectors: 2x Mic in (XLR), 2x insert
Operation voltage: +12V / -12V
Measures: 12HP / Depth: 35mm

Kit:
-BOM, schematics, pictorial build guide (text in Finnish for time being)
-Tech support via email
-Front panel: Black glassfibrelaminate board with metallic text
-High quality PCBs (throuhg hole plated, silk screened)

Link to Google translated build guide

What is included in the kit?

You´ll get all the parts that are needed to build the fully working eurorack module, istructions and parts for 10pin power supply cable.

How long it takes to assemble this kit?

Professional builder can do it in 1-2 hours, but for beginners, it can take 2-4 hours.

For whom this kit is suitable?

Kit is intended for all, beginners, experienced builders etc. These kits works with safe voltafes and building is just easy and fun  - it's always rewarding to use something that you have built by your own hands. Assembling the kit however requires special care - after all this is connected as part of expensive eurorack system.

What kind of tools do you need to build kits?

Pretty basic tools are enough but, especially if you are the beginner, please use a good soldering station and good quality solder. Making good joints with lousy soldering equipment is difficult. We have collected a tool kit from the tools we actually use every day. These are not that expensive but works great for building all kinds of electronic circuits. You can find it here:

Tool kit for building audio equipments

And you also get the best customer care so if you have any question during the building process or cannot get your project to work we are here to help you!