Power supplies for pedal boards

DC10 is a member of CIOKS brand new professional range of dedicated multi-output power supplies for effect pedals. It has 10 regulated and well filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it's a perfect solution for bigger rigs only with pedals using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements like those from TC Electronic Nova series, Eventide Factor series, MoogerFoogers, Radial Tonebone or others without the need of custom cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V DC, and combined with one of the included Stack Flex also 18 and 24V DC. The first 4 outlets offering 4x100mA are perfect for standard 9V battery operated pedals. Learn More

AC8 is a professional medium sized dedicated multi-output power supply for effect pedals. It’s a perfect solution for small or medium size rigs with a single pedal which requires an AC power source. Outlet 7 or 8 will power your vacuum tube pedal from Electro-Harmonix, Hughes & Kettner or Kingsley, the Whammy or JamMan from DigiTech, or other pedal which requires 9 or 12V AC. The first 6 outlets offering 400mA are ideal for pedals using 9 or 12V DC at lower currents op to 100mA. Combined with the included Stack Flex the AC8 will also power your 18 or 24V pedal. 9 or 12V DC at lower currents op to 200mA. Learn More

The new CIOKS Big John link is a small sized yet quite powerful power supply for effect pedals with 6 outlets configured in 4 isolated sections. The first four outlets are divided in two isolated sections, which yield 100mA each and offer voltages 9 and 12V. The last two isolated high current outlets put out a max. current of 400mA each at voltages 9 or 12V.

Learn More

The new CIOKS Schizophrenic link is a small sized power supply for effect pedals with a versatility yet not seen in such a small unit. It has 6 isolated outlets and offers voltages 9, 12 and 18V with no need of special Flex cables. The first two outlets can be set to 18V, where the last two are configurable to 12V. If needed all 6 outlets will give you 9V DC in the default position of the settings switch with a total max. output current of 1.000mA.

Learn More

Adam link is a small and very flat power supply for effect pedals with 4 isolated outlets. Being only 31mm high, it fits under the smallest Pedaltrain models PT-nano or PT-mini.It offers voltages 9 or 12V and a total output current of 700mA. The top two fixed 9V outlets will power any two Strymon or or other two medium current pedals. The bottom two outlets, configurable to either 9 or 12V, will power two or even more standard low current pedals when used with Split Flex or 3-way daisy chain. If needed, all 4 isolated outlets will give you 9V DC in the default position of the settings switch.

Learn More

Learn More

Learn More

Cioks SOL fits small and medium size pedalboards. Learn More

Learn More

Palmer PWT12IEC's 10 x 9VDC outputs, 2 adjustable outputs and USB outputs allow the power supply to be used with a wide variety of pedalboards and studio setups. Learn More

Palmer PWT06IEC's 6 outputs (1x9V, 2x9/12V, 2x9/18V, 2xadj, 2xUSB) allow the power supply to be used with a wide variety of pedalboards and studio setups. Learn More

CIOKS DC10 LINK can supply enought power for bigger pedalboards. 10 isolated outputs with total 2800mA max current. 9 x 9 or 12VDC outputs + handy 9-24V adjustable led monitored output for pedals that needs something else than standard 9 or 12VDC. Includes lots of cables and 5 year warranty.

Learn More

• 5 isolated outlets with 9, 12 or 18V
• total output current of 900mA
• two powerful outlets, 300mA each
• one outlet configurable to 18V
• high efficiency toroidal transformer
• short circuit protection of all outlets
• advanced LED monitoring of each outlet
• 120 or 230V mains voltage operation
• detachable mains power cord
• with CIOKS unique mains link feature, DC5 easily adds 5 extra isolated outlets to another link power supply
• 10 Flex cables included
• Split Flex included
• super flat design, fits under Pedaltrain PT-nano or PT-mini
• mounts easily to pedal boards

Specifications:
Outlet 1-2:  9 or 12V DC / 100mA each
Outlet 3:  9 or 18V DC / 100mA
Outlet 4-5:  9 or 12V DC / 300mA each

Size: 130x88x31mm (excl. detachable rubber feet)
Weight: 0,7kg

Warranty period: 5 years worldwide

Learn More

The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.

Learn More

With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated. Learn More

Learn More

8 x 9V 300mA and 4x 6-18VDC (400ma) pedal board power supply.

Learn More

Learn More

Learn More

Learn More